Back to top
Loading…
emuca - vida en los muebles

Zamierzasz usunąć ten koszyk. Jesteś pewny?

Dostęp do obszaru prywatnego Emuca - Vida en los muebles

Forum techniczne

Przedstaw nam swoje wątpliwości dotyczące naszych produktów a nasz Dział Pomocy Technicznej (SAT) skontaktuje się z tobą, aby przedstawić rozwiązanie.

Drawers and slides

The minimum unit depth required to install a Vantage-Q exterior drawer with push is calculated with the formula: Minimum depth = Depth + 38 mm.
In this case the minimum unit depth needed will be 500 + 38 = 538 mm.

The minimum unit depth required to install a Vantage-Q interior drawer with push is calculated with the formula: Min. depth = Depth + 44 mm.
In this case the minimum unit depth needed will be 500 + 44 = 544 mm.

It is recommended to mount the guide rail synchroniser with push for the Vantage-Q drawer on units with a width of more than 600 mm.

It is recommended to mount the guide rail synchroniser with push for the Vantage-Q drawer on units with a width of maximum than 1,200 mm.

The RAL code of the white finish of the sides of the Vantage-Q kitchen drawer is approximately 9003.

The RAL code of the grey finish of the sides of the Vantage-Q kitchen drawer is approximately 9006.

In order to assemble a Vantage-Q type kitchen drawer with hinges on the unit doors (hinged doors) it is necessary to use hinges with an opening angle of 165ª or to use spacers, doing so means there will be enough space to pull out the drawer.

Yes, the spacers that are user for assembling kitchen drawers are the same as hinges on unit doors (hinged doors).

In order to plan the design of a kitchen drawer unit with Vantage-Q drawers, we need to bear in mind several parameters, this work is made easier with a help table to configure those units.

This calculation table makes it possible to calculate the position of the guides, depending on the dimensions of the unit and the number of drawers.

Also, it makes it possible to choose different heights of drawer, consequently it calculates the height of the façade of each of them within the same unit.

What different heights of drawer can I combine in a kitchen drawer unit with Vantage-Q drawers?

Documents:

Download

In order to plan the design of a kitchen drawer unit with Vantage-Q drawers, we need to bear in mind several parameters, this work is made easier with a help table to configure those units.

This calculation table makes it possible to calculate the position of the guides, depending on the dimensions of the unit and the number of drawers.

Also, it makes it possible to choose different heights of drawer, consequently it calculates the height of the façade of each of them within the same unit.

How can I plan the design of a kitchen drawer unit with Vantage-Q drawers?

Documents:

Download

We have different heights of sides and accessories that make it possible to create different types of drawers.

You can design inner and exterior drawers, with a large capacity for saucepans, with rounded or square rails, with inside accessories and even glass sides.

What types of drawers can I design for a kitchen with Vantage-Q drawers?

Yes, the Lokbox mechanism is used to fasten the bottom of the drawer to the front part without preventing adjustment of it. It is compatible with the Concept, Slim and Vantage-Q drawers or any drawer. It is especially recommended for very wide drawers used in the furnishings of kitchens, bathrooms, lounges and even inside wardrobes. However, you need to take into account that the installation dimensions change. See diagram.

Is there a mechanism in order to fasten the bottom of the drawer to the front part without preventing adjustment?

Yes, for the assembly of the rectangular under sink insert it is necessary to make a 90º angle straight machining cut, although it is recommended to make a machining cut with a radius of 20 mm.

The following video shows how you can easily assemble the Vantage-Q drawer.

The following video shows how you can easily assemble the Vantage-Q drawer.

Technical questions box

You can not find the information you need? Raises your technical questions about our products and our technical department will solve.