Zamierzasz usunąć ten koszyk. Jesteś pewny?
Przedstaw nam swoje wątpliwości dotyczące naszych produktów a nasz Dział Pomocy Technicznej (SAT) skontaktuje się z tobą, aby przedstawić rozwiązanie.
The locking pivots that are mounted on the Silver guide rails are designed in order to easily fasten the drawers to the guide rails, thus preventing them from falling during transportation or handling.
These pivots avoid the use of additional screws and for their assembly you only need a small hole in the side of the drawer. In this manner the drawer can be assembled and disassembled as many times as you wish.
The difference between the hidden Slippe rails with a hook as opposed to those that do not have a hook, is the possibility of disassembling the drawer with a simple click.
There is a blocking pin that is designed in order to be able to fasten the drawers to the hidden Slippe rails simply and affordably, thus avoiding them from falling during transport or handling. There are also two different models, one for total extraction rails and another longer model for partial extraction rails.
With this pivot, you avoid the use of additional screws, and in order to assemble it you only need a small hole in the side wall of the drawer. In this manner the drawer can be assembled and disassembled as many times as you want.
It is enough to use a single locking pin in order to fasten a drawer to the hidden Slippe rails. For assembly, you only require a small hole in the side of the drawer rack as indication in the catalogue´s machining diagrams. In this manner the drawer can be assembled and disassembled as many times as you want.
The adjustment of the hidden runners for Slippe drawers without a hook is achieved by turning the washer on the front fastening pivot, which is screwed for that purpose.
You can not find the information you need? Raises your technical questions about our products and our technical department will solve.